This is an unique innovated vacuum dryer which is space saving compared to the conventional Rotocone Vacuum Dryer. This dryer has a single stand on one side only whereas conventional Rotocone Vacuum Dryer has two side stands on either side which occupies more space. This unit is very much useful for drying high sterile pharma and high toxic chemical products along with solvent recovery system under vacuum.
Salient Features
- Compact design to save the space
- Choppers can be employed
- Inbuilt mechanical seal
- Ideal for high purity sterile process and clean room setup
- Suitable for Pharmaceutical, High sterile and boitech industries
- Suitable for cGMP standard and FDA license.
- M.O.C.:M.S. Grades/s.s Grades Hastealloy/Titanium etc.
- Capacity-10 Ltrs to 1,500Ltrs.
Retractable Shaft (Specialised design for CIP). The design of the Plough Shear Mixer Dryer is modified to suit specific CIP purpose essential in Pharma industry. Here the entire shaft can be retracted out of the main shell using guides, so that the equipment can be thoroughly cleaned from inside for batch change over. The shaft is specially designed in Cantilever shape and can be provided with a Mechanical seal with close tolerances. Choppers can be employed in this design too. This is a high efficiency dryer unit used for drying of wet cake product after filtration. This equipment can be used in drying process of various Pharmaceuticals, Intermediate Compounds, Fine Chemicals, Chemicals, Agro Chemicals, Pesticides, Insecticides, Dyes and Food Products.
Salient Features
- Best suited for sticky, lump forming materials
- High quality mixing with reduced mixing time
- Easy maintenance and suits cGMP application.
- Retractable shaft allows CIP, which is a very critical requirement in Pharma application
- Available in various grades of Stainless Steel, Hastelloy, Titanium and Carbon steel.
- Flush discharged valve, Pneumatic, hand or Hydraulic operated for easy operation.
Retractable Shaft (Specialised design for CIP)
These rotary vacuum dryer give drying, mixing and breaking effects simultaneously. Wet cake or slurry is fed through charging door, while the agitator is rotating in clockwise direction, vacuum is applied in the dryer and heating media is circulated in the jacket. Evaporation of moisture takes place under vacuum and vapors passes through the dust catcher into the condenser, where it is condensed and collected in the receiver. Dried material is discharged through discharge valve. The lump breaker rods are provided to achieve good drying effect. This is a high efficiency dryer unit used for drying of wet cake product after filtration. This equipment can be used in drying process of various Pharmaceuticals, Intermediate Compounds, Fine Chemicals, Chemicals, Agro Chemicals, Pesticides, Insecticides, Dyes and Food Products.
Salient Features
- Best suited for sticky, lump forming materials
- High quality mixing with reduced mixing time
- Easy maintenance and suits cGMP application
- Retractable shaft allows CIP, which is a very critical requirement in Pharma application
- Available in various grades of Stainless Steel, Hastelloy, Titanium and Carbon steel
- Flush discharged valve, Pneumatic, hand or Hydraulic operated for easy operation.
This multipurpose drying unit is extremely useful for uniform and low temperature drying of heat sensitive chemicals, pharmaceutical formulations, fine chemicals etc. It has double conical vessel with rotating system and vacuum solvent recovery system. As the Dryer is rotating, there is no charring or retention of product, the result is that one can change the material to be dried without much a do. The Dryer rotates at a very low speed (5 to 15 rpm) and thus has very low wear and tear and requires very little maintenance. This machine is ideal for crystalline products, granules used in chemical, pharmaceutical and food industries. Loss of material is effectively controlled by a specially designed pilot filter fitted on the vacuum side. The finish is up to 220 Grits. The capacity of the machine ranges from 200 liters to 10,000 liters. The Energy Saver: This equipment is working under vacuum. Due to vacuum, the drying is enhanced resulting in fast drying, cutting the process time, which saves heat energy and electric energy.
Salient Features
- GMP models for final pharma products
- Totally sealed and protected from contamination
- Quick loading & unloading
- Fast drying
- Energy saving
- M.O.C.: M.S. grades / S.S. grades / Hastealloy
- Choppers can be provided
This is the horizontal single shaft plough shear mixer which is based on the principle of mechanical fluidisation of the product. The particular shape, position and rotation speed of the mixing tools, create a centrifugal vortex motion, which allows the products to be projected in a three dimensional way and to merge with each other. Plough shear mixer ensures that components with a different particle size and bulk density are perfectly blended and mixed with high precision within the shortest possible time. This is a high efficiency dryer unit used for drying of wet cake product after filtration. This equipment can be used in drying process of various Pharmaceuticals, Intermediate Compounds, Fine Chemicals, Chemicals, Agro Chemicals, Pesticides, Insecticides, Dyes and Food Products.
Salient Features
- Best suited for sticky, lump forming materials
- High quality mixing with reduced mixing time
- Custom built to suit customer requirements
- Available in various grades of Stainless Steel, hastelloy, titanium and carbon steel
- Jacketed construction available for steam and cooling applications.
- Can be offered for vacuum application
- Flush discharged valve, Pneumatic, hand or Hydraulic operated for easy operation.
The working principle of the cone mixer is three dimensional originated from rotating elements in combination with a conical vessel.The mixing screw conveys the product from bottom of the vessel to the products surface.The orbital arm orbits the mixing screw along the inner vessel wall causing convective mixing of particles and shear. The speed of particles in the downward mass flow when re-circulated by gravity in a conical vessel increases as the vessel diameter decreases. The result of these simultaneous actions is a fast and intensive mixing with low consumption of power together with high mixing accuracy.
The Equipment
This is a low power consuming dryer unit used for drying of wet cake product after filtration. This equipment can be used in drying process of various Pharmaceuticals, Intermediate Compounds, Fine Chemicals, Chemicals, Agro Chemicals, Pesticides, Insecticides, Dyes and Food Products.
Salient Features
- Gentle action on product through low power consumption
- Fast mixing times with a high degree of mixing accuracy
- Totally sealed and protected from contamination
- Quick loading & unloading. So time is saved
- Provision of sampling nozzle without breaking vacuum
- Compact design gives excellent appearance to equipment
- Designed and Manufactured to suit critical hygienic conditions of pharma and food industries. (Confirming to cGMP standards)
- The unit is completely air tight hence no pollution in environment
- Self emptying with minimum product hold up
- Useful for full solvent recovery
- Dust free operation
- Vacuum can be employed hence drying is fast and is also accelerated due to stirring of material
- It is used as mixer-cum-dryer. So a considerable saving in labour, handling, power and space.
The working principle of the cone mixer is three dimensional originated from rotating elements in combination with a conical vessel.The mixing screw conveys the product from bottom of the vessel to the products surface.The orbital arm orbits the mixing screw along the inner vessel wall causing convective mixing of particles and shear. The speed of particles in the downward mass flow when re-circulated by gravity in a conical vessel increases as the vessel diameter decreases. The result of these simultaneous actions is a fast and intensive mixing with low consumption of power together with high mixing accuracy.
The Equipment
This is a low power consuming dryer unit used for drying of wet cake product after filtration. This equipment can be used in drying process of various Pharmaceuticals, Intermediate Compounds, Fine Chemicals, Chemicals, Agro Chemicals, Pesticides, Insecticides, Dyes and Food Products.
Salient Features
- Gentle action on product through low power consumption
- Fast mixing times with a high degree of mixing accuracy
- Totally sealed and protected from contamination
- Quick loading & unloading. So time is saved
- Provision of sampling nozzle without breaking vacuum
- Compact design gives excellent appearance to equipment
- Designed and Manufactured to suit critical hygienic conditions of pharma and food industries. (Confirming to cGMP standards)
- The unit is completely air tight hence no pollution in environment
- Self emptying with minimum product hold up
- Useful for full solvent recovery
- Dust free operation
- Vacuum can be employed hence drying is fast and is also accelerated due to stirring of material
- It is used as mixer-cum-dryer. So a considerable saving in labour, handling, power and space.
